What we paint

Built around two simple promises

We prep the surface so the finish can do its job, and we protect everything else so you can enjoy the result without repair bills. Every service below follows that same rule.

1. Interior Wall and Ceiling Painting

The interior of a home sees more wear than any other painted surface, yet it deserves the calmest, cleanest finish of all. Our crews move furnishings to the centre under drop sheeting, wash and patch every surface, then prime where texture or stain calls for it. Walls receive two even coats of a topcoat in your chosen sheen, while ceilings are rolled flat so they stay free of distracting roller marks under lamps and skylights. Door frames, baseboards and window casings are cut in by hand for a clean, crisp line. When we leave, the room is dust free and the touch-up tins carry a label so a future scuff is an easy fix.

Two full topcoats Bonding primer Hand cut in edges Floor protection

2. Exterior Siding and Trim

Toronto weather tests every building envelope, which is why exterior painting starts with honesty about the surface. We power wash grime, scrape loose coating, sand rough areas and prime bare wood, stucco or cement board so the new film has something sound to grip. Siding, fascia, soffit, door frames and eavestrough downspouts each receive a weather rated topcoat made for the changing seasons. Around windows we seal carefully so moisture never finds a way behind the paint. The result is a facade that sheds rain, resists peeling and keeps its colour through sun, freeze and thaw for years to come.

Power wash and scrape Weather rated topcoat Bare wood primed Window sealing

3. Cabinet Refinishing

Cabinets are touched more than any other painted finish in a kitchen or bathroom. Our refinishing service strips the grease, scuffs the old film so new paint will grip, and applies a catalysed primer that locks down stains from cooking and steam. Doors are laid flat and sprayed for a smooth, factory style body that cannot show brush strokes. Drawer fronts, visible frame and any fixed panels are finished to match, and hardware is removed or masked so hinges never bind and screw lines stay clean. After a full cure, we re-hang every door and drawer so the whole room feels new at a fraction of the replacement cost.

Degrease and scuff Catalysed primer Sprayed doors Hardware masked

4. Drywall Repair and Preparation

Colour cannot hide a wall that is not whole. We repair nail pops, dents, chips and the small scars left by furniture movement, and we re-tape the joints that begin to crack along ceilings. For walls that need a truly smooth result, we skim the surface then sand to a level that reads as one plane under angled light. Cracks that come from building movement are taped with fibrous mesh so they stay closed instead of opening again the following season. Once the surface is primed and sealed, it holds your chosen colour evenly, and the finished wall looks intentional rather than merely covered.

Nail pop repair Tape and skim Level five sand Prime and seal

5. Stucco and Masonry Coatings

Stucco and masonry breathe, and they need coatings that let moisture move outward rather than trapping it in the wall. We apply breathable, elastomeric style coatings that flex with the building through freeze and thaw while sealing hairline cracks from the weather. Before any material goes on, we stabilise loose areas, repair spalls and match the existing profile so the new coating reads as part of the original wall. Block, brick and architectural concrete all receive a system chosen for their particular porosity, giving facades a clean, uniform colour that also protects the structure behind it.

Breathable film Crack sealing Profile matched Weather guard

6. Colour Consultation and Sampling

Choosing a colour is often the hardest part of a paint job, which is why our advice comes before the first can is opened. We study the light that falls in each room at different hours, the undertones of your flooring and cabinetry, and the mood you want to create, then narrow the wall of sample cards down to a manageable family of palettes. We paint real test patches on your actual walls so you can live with a colour across morning, noon and evening before committing to full coverage. That small step prevents disappointment, saves an unnecessary repaint and turns the final finish into a confident choice.

Light study Undertone matching Live test patches Final spec sheet

How a project runs from start to finish

1

Walkthrough

We visit, measure the spaces and listen to the look you want.

2

Written quote

You receive a clear scope, the paint system and a firm price.

3

Preparation

We protect, patch and prime so the colour will truly last.

4

Finish left clean

We paint, clean up and walk the rooms through with you.

Ready to talk surfaces?

Tell us about your rooms or your building. Nvs Painting Ltd. will visit and return an estimate that is honest about both the work and the cost.

Request a free estimate